Table of Contents
Advertisement
Event code: 445
Message:
ASIC detected a system anomaly.
Severity:
Informational.
Explanation:
The application-specific integrated chip (ASIC) detected a deviation in the normal operating mode or operating
status of the switch.
Action:
No action required. An additional event code is generated if this incident exceeds an error threshold that results in
a system event.
Event data:
Byte 0 = embedded port number.
Byte 1 = anomaly reason code.
Bytes 4 - 7 = elapsed millisecond tick count.
Bytes 8 and 9 = HA error callout #1.
Bytes 10 and 11 = HA error callout #2.
Distribution:
Product
EFCM Basic
Event Log
Event code: 453
Message:
New feature key installed.
Severity:
Informational.
Explanation:
This event occurs when a new feature key is installed from the management server or EFCM Basic Edition
interface. The switch performs an IPL when the feature key is enabled. Event data indicates the feature(s)
installed.
Action:
No action required.
Event data:
Byte 0 = feature description as follows: 00 - 04 = flexport technology, 06 = open systems management server,
07 = FICON management server. Byte 1 = feature description as follows: 01 = full volatility, 02 = FICON cup
zoning, 03 = SANtegrity authentication, 04 = CNT WAN support, 05 = hardware trunking, 06 = SANtegrity
binding, 07 = open trunking.
Distribution:
Product
EFCM Basic
Event Log
252
SAN32M-2 Installation and Service Manual
Management Server
System
Event Log
Error LED
Management Server
System
Event Log
Error LED
Byte 12 = detecting port.
Byte 13 = connected port.
Bytes 16 and 17 = HA error callout #3.
Bytes 18 and 19 = HA error callout #4.
E-Mail
Call-Home
Sense Info
E-Mail
Call-Home
Sense Info
Host
Link Incident
Log
Host
Link Incident
Log
Advertisement
Table of Contents
