Table of Contents
Advertisement
198
SAN32M-2 Installation and Service Manual
Follow the instructions for downloading the firmware.
1. Transfer the downloaded firmware file to the rack-mount
management server or PC communicating with the EFCM Basic
Edition interface. Use a diskette, CD-ROM, or other electronic
means.
2. From there, install the firmware as described in this guide.
When upgrading software, follow all procedural information
contained in release notes or EC instructions that accompany the
version. Such information supplements information provided in this
general procedure.
To install or upgrade the SAN management application:
1. At the server, close and exit all applications, then perform one of
the following:
— Insert the EFC Management Applications CD-ROM into the
CD-ROM drive of the management server.
— Ensure the desired software version is obtained from the
Filecenter and resident on the server hard drive. Refer to
Install or upgrade software
2. At the server's Windows desktop, click Start at the left side of the
task bar, then select the Run option. The Run dialog box displays.
3. In the Open field at the Run dialog box, type:
— C:\mcdataServerInstall.exe to install from the server
hard drive.
— D:\mcdataServerInstall.exe to install from the EFC
Management Applications CD-ROM.
4. Click OK. The InstallShield third-party application prepares to
install the software version, and opens the InstallShield Wizard
dialog box
(Figure
68).
for instructions.
Advertisement
Table of Contents
