Table of Contents
Advertisement
130
SAN32M-2 Installation and Service Manual
13
As indicated by event code 083, a port is set to an inactive state.
a. At the Event Log, examine the first two bytes of event data.
b. Byte 0 specifies the port reporting the problem. Byte 1 specifies
the inactive reason as listed in
Inactive port reasons and actions
Table 16
Byte 1
Inactive port reason
02
Feature key not enabled.
03
Switch speed conflict.
04
Optics speed conflict.
06
Port swap conflict.
14
A port is inactive because Flexport Technology is disabled. Install the
Flexport Technology PFE key to enable N_Port capability. Refer to
Install PFE keys (optional)
Configure PFE key (optional)
15
A port is inactive because the:
•
Port cannot operate at the product (backplane) speed.
•
Optical transceiver does not support the configured port speed.
Change the port speed to be compatible with the backplane or optical
transceiver speed.
a. For the product reporting the problem:
— EFCM Basic Edition - Select Ports and Basic Info from the
Configure menu at any view. The Basic Information View
displays.
— Element Manager - Select Ports from the Configure menu
at any view. The Configure Ports dialog box displays.
b. If necessary, use the vertical scroll bar to display the information
row for the inactive port.
Table
16.
(EFCM Basic Edition) or
(Element Manager). Exit MAP.
Action
Go to
step
14.
Go to
step
15.
Go to
step
15.
Go to
step
16.
Task 15:
Advertisement
Table of Contents
