Table of Contents
Advertisement
Figure 26
Task 9: Set management server date and time
Properties dialog box (General tab)
4. Click OK. The new user information is added and the Properties
dialog box closes. Record the user information for reference if the
server hard drive fails and must be restored.
5. If no other users are to be changed, close all dialog boxes and
return to the Windows desktop.
SAN Management application logs are stamped with the server date
and time, and the product system clock is synchronized with the
server date and time by default. To set the server date and time:
1. At the Windows desktop, click Start at the left side of the task bar
(bottom of the desktop), then sequentially select Settings, Control
Panel, and Date/Time. The Date/Time Properties dialog box displays
with the Date & Time page open.
NOTE: The Time Zone field must be set before the Date & Time field.
Chapter 2: Installation tasks
57
Advertisement
Table of Contents
