IBM TotalStorage SAN32M-2 Installation And Service Manual page 142

116
SAN32M-2 Installation and Service Manual
Does the customer want the second server configured as a client?
YES NO
↓
Power off the server reporting the Duplicate Session
problem. Exit MAP.
19
Determine the IP address of the management server running the first
instance of the SAN management application.
a. After the server powers on and successfully completes POSTs,
the LCD panel displays a Welcome!! message and continuously
cycles through and displays operational information.
b. After a few seconds, the LCD panel displays a LAN 2:
010.001.001.001 message.
c. Depending on product-to-server LAN connectivity, record the
appropriate IP address (LAN 1 or LAN 2).
Continue to the next step.
20
Configure the management server reporting the Duplicate Session
problem as a client.
a. At the SAN management application, select Logout from the
SAN menu. The application closes and the Log In dialog box
displays.
b. Type the user ID and password obtained in
MAP. Both are case sensitive).
c. Type the IP address of the management server running the first
instance of the SAN management application in the Network
Address field.
d. Click Login. The application opens and the main window
displays.
Was the maintenance action successful?
NO YES
↓
The management server connection is restored and the
second management server is a client. Exit MAP.
Contact the next level of support. Exit MAP.
MAP 0000: Start