Table of Contents
Advertisement
Figure 66
Figure 67
196
SAN32M-2 Installation and Service Manual
b. A grey square with a yellow exclamation mark appears
adjacent to the icon representing the reset switch, indicating
switch is not communicating with the management server.
c. At the SAN management application, select Setup from the
Discover menu. The Discover Setup dialog box displays
(Figure
66).
Discover Setup dialog box
d. Select (highlight) the entry representing the reset switch in the
Available Addresses window and click Edit. The Address
Properties dialog box displays
Address Properties dialog box
e. Type 10.1.1.10 in the IP Address field and click OK. Entries at
the Discover Setup dialog box reflect the new IP address.
(Figure
67).
Advertisement
Table of Contents
