Table of Contents
Advertisement
Configure private LAN addresses
1. At the management server LCD panel, press ENTER. The
Welcome!! or operational information message changes to an
Input Password 0**** message.
2. Using the
button to increment a digit, the
decrement a digit, the
button to move the cursor right, input the default password
(9999), and press ENTER. A LAN 1 Setting?? message appears at
the LCD panel.
3. Press the
button several times until the Change Password?
option appears at the LCD panel, then press ENTER. A New
Password 0**** message appears.
4. Use the arrow keys as described in
numeric password, then press ENTER. A Save Change? Yes,
Save!! message appears.
5. Press ENTER. A Wait a moment! message appears at the LCD
panel, the LCD panel returns to the LAN 1 Setting?? message,
and the password changes.
To configure TCP/IP network information for the private LAN
connection (LAN 2):
1. At the management server LCD panel, press ENTER. The
Welcome!! or operational information message changes to an
Input Password 0**** message.
2. Using the
button to increment a digit, the
decrement a digit, the
button to move the cursor right, input the default or changed
password, and press ENTER. The LAN 1 Setting?? message
appears at the LCD panel.
3. Press the
button. The LAN 2 Setting?? message appears at the
LCD panel. Press ENTER and the default IP address of 10.1.1.1
appears.
4. Use the arrow keys as described in
address, then press ENTER. A Save Change? Yes, Save!! message
appears.
5. Press ENTER. The LAN 2 IP address changes and the default
subnet mask of 255.0.0.0 appears.
button to
button to move the cursor left, and the
step 2
to input a new 4-digit
button to
button to move the cursor left, and the
step 2
to input a new IP
Chapter 2: Installation tasks
49
Advertisement
Table of Contents
