Fabric Merge Failure Reasons And Actions - IBM TotalStorage SAN32M-2 Installation And Service Manual

146
SAN32M-2 Installation and Service Manual

Fabric merge failure reasons and actions

Table 20
Bytes 8 - 11 Merge failure reason
01 Invalid data length.
08 Invalid zone set format.
09 Invalid data.
0A Cannot merge.
F0 Retry limit reached.
F1 Invalid response length.
F2 Invalid response code.
23
A zone merge process failed during ISL initialization. The following
list explains the reason:
• Reason 01 - An invalid data length condition caused an error in
a zone merge frame.
• Reason 08 - An invalid zone set format caused an error in a
zone merge frame.
• Reason F0 - A retry limit reached condition caused an error in a
zone merge frame.
• Reason F1 - An invalid response length condition caused an
error in a zone merge frame.
• Reason F2 - An invalid response code caused an error in a zone
merge frame.
Disconnect the fiber-optic jumper cable from the E_Port reporting the
problem, then reconnect the cable to the same port.
Was the maintenance action successful?
NO YES
↓
The fabric, ISL, and product are operational. Exit MAP.
Perform a data collection and contact the next level of support. Refer
to Collect maintenance data
maintenance data (Element Manager). Exit MAP.
(EFCM Basic Edition) or
Action
Go to step 23.
Go to step 23.
Go to step 24.
Go to step 24.
Go to step 23.
Go to step 23.
Go to step 23.
Collect