Figure 69
Replacement
204
SAN32M-2 Installation and Service Manual
1
2
B
SFP optical transceiver removal and replacement
8. Inspect the Event Log:
— At a web browser communicating with the EFCM Basic
Edition interface, select Event from the Logs menu.
— At the management server (Element Manager application),
select Event Log from the Logs menu.
An event code 513 (SFP optics hot-removal completed) appears in
the Event Log.
To replace an SFP optical transceiver:
1. Ensure an ESD grounding cable is connected to the product
chassis (or approved bench ground) and your wrist.
2. Remove the replacement transceiver from its packaging.