Table of Contents
Advertisement
Operators with a browser-capable PC and Internet connectivity can
manage the switch through a firmware-resident Enterprise Fabric
Connectivity Manager (EFCM) Basic Edition interface. The interface
manages only a single switch, and provides a graphical user interface
(GUI) that supports configuration, statistics monitoring, operation,
and maintenance. The interface is opened from a web browser
®
®
running Netscape Navigator
4.6 (or higher) or Microsoft
Internet
Explorer 4.0 (or higher).
As an option, the switch is managed through a one-unit (1U) high,
rack-mount management server running a Java™-based SAN
®
management application (SANavigator
4.2 or EFCM 8.7 or later)
and the switch Element Manager application.
Multiple switches and the management server communicate on a
local area network (LAN) through one or more 10/100 Base-T
Ethernet hubs. The 24-port Ethernet hubs are optional and ordered
with the switch. Up to three hubs are daisy-chained as required to
provide additional Ethernet connections as more switches (or other
managed products) are installed on a network.
Field replaceable units
The switch provides a modular design that enables quick removal
and replacement of FRUs, including small form factor pluggable
(SFP) optical transceivers and power supply assemblies.
Figure 1
illustrates the front of the switch and shows the:
1. Ethernet LAN connector.
2. RESET button.
3. Chassis ground (GND) connector.
4. Green power (PWR) light-emitting diode (LED).
5. Amber system error (ERR) LED.
6. SFP optical transceivers (32).
2
SAN32M-2 Installation and Service Manual
Advertisement
Table of Contents
