Table of Contents
Advertisement
Figure 55
Reset
configuration data
172
SAN32M-2 Installation and Service Manual
Restore Configuration View
4. At the Download Configuration file from field, select the desired file
from the PC hard drive using the Browse button or type the
desired filename.
5. Click Send and Load Configuration. A message box displays,
indicating any browser operation will terminate the configuration
download.
6. Click OK to download the configuration. The process takes
several minutes to complete, during which the browser is
unavailable. When the process completes, the message
Configuration restored successfully. displays.
When configuration data is reset to factory default values, the switch
defaults to the factory-set (Internet Protocol) IP address and all
optional features are disabled. To reset configuration data to factory
default settings:
1. Notify the customer the switch is to be set offline. Ensure the
customer's system administrator quiesces Fibre Channel frame
traffic through the switch and sets attached FC-AL devices
offline.
2. Set the switch offline. For instructions, refer to
3. At the EFCM Basic Edition interface, select Switch from the
Maintenance menu at any view. The Switch View displays
(Figure
51).
4. Click Reset Configuration. A dialog box with the message Are you
sure that you want to reset the configuration? displays.
5. Click OK to reset the configuration.
Set online
state.
Advertisement
Table of Contents
