Table of Contents
Advertisement
Figure 43
82
SAN32M-2 Installation and Service Manual
New Threshold Alert dialog box (screen 3)
10. Select the Port Type or Port List radio button.
• Select the Port Type radio button, then the E_Ports, F_Ports, or
FL_Ports radio button to cause an alert to generate for
configured ports.
• Select Port List to configure individual ports by clicking the
check box adjacent to each port number. Select Set All Ports to
place a check mark adjacent to all port numbers.
11. Click Next. The New Threshold Alert dialog box (screen4) displays
a summary of the alert configuration. To make changes, move
back and forth through the configuration screens by selecting
Previous or Next.
12. Click Finish. The Configure Threshold Alerts dialog box reappears
listing the name, type, and state of the alert configured.
13. To activate the alert, highlight (select) the alert and click Activate.
Advertisement
Table of Contents
