Table of Contents
Advertisement
• 315 - Cooling fan propeller recovered.
If the event codes do not appear, go to
isolate the problem.
7. Verify power supply operation. At a web browser communicating
with the EFCM Basic Edition interface or at the management
server (Element Manager application), open the Hardware View
and observe the FRU graphic to ensure alert symbols do not
appear (yellow triangle or red diamond).
If a problem is indicated, go to
problem.
8. Perform the data collection procedure. Refer to
data
(EFCM Basic Edition) or
management application) for instructions.
9. Clear the system error LED on the product front bezel:
— At a web browser communicating with the EFCM Basic
Edition interface, select Clear System Error Light from the
Maintenance menu.
— At the management server (Element Manager application),
open the Hardware View. Right-click the front panel bezel
graphic (away from a FRU), then click the Clear System Error
Light menu selection.
10. If necessary, close and lock the equipment cabinet door.
Chapter 5: Removal and replacement procedures
MAP 0000: Start MAP
MAP 0000: Start MAP
Collect maintenance
Collect maintenance data
to
to isolate the
(SAN
209
Advertisement
Table of Contents
