Table of Contents
Advertisement
Figure 34
Task 17: Set product date and time
70
SAN32M-2 Installation and Service Manual
Configure FICON Management Server Zoning dialog box
a. Enable or disable FICON control unit port (CUP) zoning by
selecting the Enable Zoning option. Check the box to enable
FICON CUP zoning.
b. Type the WWN of servers to be configured as partitioned
hosts. Partitioned host queries regarding status of zoned
devices are filtered by zoning data.
c. Click Activate to enable changes and close the dialog box.
Log entries are stamped with the date and time received from the
product. To set the effective date and time for the product:
1. Select Date/Time from the Configure menu at any view. The
Configure Date and Time dialog box displays
Date and time can be set manually, or set to be periodically
updated by the SAN management application (the product and
application synchronize at least once daily).
(Figure
35).
Advertisement
Table of Contents
