Table of Contents
Advertisement
Configure product identification
Figure 11
Configure date and time
28
SAN32M-2 Installation and Service Manual
Perform this procedure to configure the product identification. The
Name, Location, and Contact variables correspond respectively to the
SNMP variables sysName, sysLocation, and sysContact, and are used by
management workstations when obtaining product data.
1. Select Switch and Identification from the Configure menu at any
view. The Identification View displays
Identification View
a. Type a unique product name of 24 alphanumeric characters or
less in the Name field. If installed on a public LAN, the name
should reflect the product's Ethernet network domain name
system (DNS) host name.
b. Type a product description of 255 alphanumeric characters or
less in the Description field.
c. Type the product's physical location (255 alphanumeric
characters or less) in the Location field.
d. Type the name of a contact person (255 alphanumeric
characters or less) in the Contact field.
2. Click OK to save and activate changes.
Perform this procedure to configure product date and time.
1. Select Switch and Date & Time from the Configure menu at any
view. The Date Time View displays
(Figure
11).
(Figure
12).
Advertisement
Table of Contents
