EFCM Basic Edition interface or SAN management application,
ensure fabric binding is enabled and fabric membership lists are
compatible for both elements.
•
EFCM Basic Edition - Refer to the EFCM Basic Edition User
Manual (620-000240) for instructions.
•
SAN management application - Refer to the SANavigator
Software Release 4.2 User Manual (621-000013) or EFC
Manager Software Release 8.7 User Manual (620-000170) for
instructions.
Was the maintenance action successful?
NO
YES
↓
The product port is operational. Exit MAP.
Contact the next level of support. Exit MAP.
12
A connection is not allowed because of a SANtegrity authentication
failure. At the EFCM Basic Edition interface or Element Manager,
modify the IP address access control list, product-level authentication
settings, port-level authentication settings, and challenge handshake
authentication protocol (CHAP) sequence to ensure device access to
the product.
•
EFCM Basic Edition - Refer to the EFCM Basic Edition User
Manual (620-000240) for instructions.
•
Element Manager - Refer to the Element Manager User Manual
(620-000242) for instructions.
Was the maintenance action successful?
NO
YES
↓
The product port is operational. Exit MAP.
Contact the next level of support. Exit MAP.
Chapter 3: Maintenance analysis procedures
129