Table of Contents
Advertisement
Task 7: Configure management server information
Access the management server desktop
Configure a server computer name and workgroup name from the
Windows operating system, using a LAN-attached PC with standard
web browser.
If required, change the server's gateway addresses and domain name
system (DNS) server IP addresses to conform to the customer's LAN
addressing scheme. The gateway addresses are the addresses of the
local router for the corporate intranet.
To login and access the server desktop:
1. Ensure the management server and a browser-capable PC are
connected through an Ethernet LAN. At the PC, launch the
browser application (Netscape Navigator or Internet Explorer).
2. At the PC, enter the LAN 2 IP address of the server, followed by
:5800, as the Internet uniform resource locator (URL). Use the
following format:
http://xxx.xxx.xxx.xxx:5800
Where xxx.xxx.xxx.xxx is the default IP address of 10.1.1.1 or the
IP address configured while performing
password and network
displays.
3. Type the default password and click OK. The Welcome to Windows
dialog box displays.
NOTE: The default TightVNC viewer password is password.
4. Click the Send Ctrl-Alt-Del button at the top of the window to
log on to the server desktop. The Log On to Windows dialog box
displays.
NOTE: Do not simultaneously press the Ctrl, Alt, and Delete keys. This
action logs the user on to the browser-capable PC, not the server.
Task 6: Configure server
addresses. The VNC Authentication screen
Chapter 2: Installation tasks
51
Advertisement
Table of Contents
