160
SAN32M-2 Installation and Service Manual
•
Operational State - Port state (Online, Offline, Not Installed,
Inactive, Invalid Attachment, Link Reset, No Light, Not Operational,
Port Failure, Segmented E_Port, or Testing).
•
Type - Port type, including generic mixed port (GX_Port), fabric
mixed port (FX_Port), generic port (G_Port), fabric port (F_Port),
or expansion port (E_Port).
•
Health Status - Condition of the installed optical transceiver
(Normal, Warning, Alarm, or No Info).
•
Transceiver - Installed transceiver type (SFP, XFP, or Unknown).
Inspect Port Properties
At the Port List View, click a physical port number listed in the Port
column. Physical properties for the selected port appear in the lower
panel of the view:
•
Port Number - Product port number.
•
Port Name - User-defined name or description for the port.
•
Port Type - User-defined port type (GX_Port, FX_Port, G_Port,
F_Port, or E_Port).
•
Operating Speed - Port operating speed (Not Established, 1 Gbps,
2 Gbps, or 4 Gbps).
•
Fibre Channel Address - Port FC address identifier. Port FC
address if the port was swapped.
•
Port WWN - Fibre Channel world wide name (WWN) of the port.
•
Attached Port WWN - Fibre Channel WWN of the device
attached to the port.
•
Block Configuration - User-configured state for the port (Blocked
or Unblocked).
•
Beaconing - User-specified for the port (On or Off).
•
FAN Configuration - User-configured state for fabric address
notification (FAN) configuration (Enabled or Disabled).
•
Operational State - Port state (Online, Offline, Not Installed,
Inactive, Invalid Attachment, Link Reset, No Light, Not Operational,
Port Failure, Segmented E_Port, Disabled, or Testing).
•
Reason - A summary appears describing the reason if the port
state is Segmented E_Port, Invalid Attachment, or Inactive. For any
other port state, the reason is N/A.