Table of Contents
Advertisement
Hardware Log
Link Incident Log
Port Threshold
Alert Log
176
SAN32M-2 Installation and Service Manual
•
Event Data - Supplementary information (if available) in
hexadecimal format. Event data is described in
Event code
tables.
The Hardware Log records a history of part removals and
replacements (insertions) for the switch. The log describes:
•
Date/Time - Date and time the part was inserted or removed.
•
FRU - Acronym representing the FRU type. (FRU refers to
field-replaceable units or part.)
•
Position - Number representing the part chassis position. The
chassis (slot) position for a nonredundant CTP card is 0. Chassis
slots for redundant power supplies are 0 and 1.
•
Action - Action performed (Inserted or Removed).
•
Part Number - Part number of the inserted or removed part.
•
Serial Number - Serial number of the inserted or removed part.
The Link Incident Log records Fibre Channel link incident events and
causes. The log describes:
•
Date/Time - Date and time the link incident occurred.
•
Port - Port number reporting the link incident.
•
Link Incident Event - Brief description of the link incident and
cause, including:
— Implicit incident.
— Bit-error threshold exceeded.
— Loss of signal or loss of synchronization.
— Not-operational primitive sequence received.
— Primitive sequence timeout.
— Invalid primitive sequence received for current link state.
Refer to
MAP 0500: Port failure or link incident analysis
actions.
The Port Threshold Alert Log records a history of threshold alert
notifications. The log describes:
•
Date/Time - Date and time the alert occurred.
Appendix A,
for corrective
Advertisement
Table of Contents
