Table of Contents
Advertisement
Event code: 585
Message:
Primitive sequence timeout.
Severity:
Major.
Explanation:
An attached server recognized either a link reset (LR) protocol timeout or a timeout while waiting for the
appropriate response (while in a NOS receive state and after NOS was not longer recognized).
Action:
A LIR is generated and sent to the attached server using the reporting procedure defined in T11/99-017v0 (OSI).
If fault isolation at the server does not detect a failure, the problem may be due to a port failure. Go to
Start MAP
to perform fault isolation. In addition, perform a data collection and return the CD to support personnel.
Event data:
Refer to the T11/99-017v0 document for the specific link incident record format.
Distribution:
Product
EFCM Basic
Event Log
Event code: 586
Message:
Invalid primitive sequence received for current link state.
Severity:
Major.
Explanation:
An attached server recognized either a link reset (LR) or a link-reset response (LRR) sequence while in the
wait-for-online sequence (OLS) state.
Action:
A LIR is generated and sent to the attached server using the reporting procedure defined in T11/99-017v0 (OSI).
If fault isolation at the server does not detect a failure, the problem may be due to a port failure. Go to
Start MAP
to perform fault isolation. In addition, perform a data collection and return the CD to support personnel.
Event data:
Refer to the T11/99-017v0 document for the specific link incident record format.
Distribution:
Product
EFCM Basic
Event Log
Management Server
System
Event Log
Error LED
Management Server
System
Event Log
Error LED
E-Mail
Call-Home
Sense Info
E-Mail
Call-Home
Sense Info
Appendix A: Event code tables
MAP 0000:
Host
Link Incident
Log
MAP 0000:
Host
Link Incident
Log
261
Advertisement
Table of Contents
