3
At the failed product, inspect the amber ERR LED and amber LEDs
associated Fibre Channel ports and CRUs.
Are any amber LEDs illuminated?
NO
YES
↓
A CRU failure, power-on self-test (POST) failure, link
incident, interswitch link (ISL) problem, fenced E_Port, or
segmented E_Port is indicated. To obtain event codes that
identify the failure, go to
4
Is the product management interface (browser PC, management
server, or OSI host console) powered on and operational?
NO
YES
↓
Go to
step
7.
5
Power on the management interface platform and launch the
associated management application:
•
EFCM Basic Edition - Refer to
EFCM Basic Edition interface (optional)
•
SAN management application - Refer to
server password and network addresses
management server desktop
•
OSI host console - Refer to documentation supplied with the
host system for instructions.
Was the maintenance action successful?
NO
YES
↓
Go to
step
7.
6
Inspect the management interface for communication link failure.
Observe one of the following:
•
A Page cannot be found, Unable to locate the server, HTTP
404 - file not found, or similar message (browser PC).
step
10.
Task 4: Configure product at the
for instructions.
and
for instructions.
Chapter 3: Maintenance analysis procedures
Task 6: Configure
Access the
101