Chapter 2. Features and Components
Base Product
Additional Required Components
© Copyright IBM Corp. 1994, 1998
The base product of the 8265 switch consists of a chassis and the following
components:
Three fan units (already installed)
•
Three fan mounting guards (already installed)
•
Fourteen blank single-slot filler plates (already installed)
•
Three blank power supply bay filler plates (already installed)
•
One rubber feet kit, for use when mounting the 8265 on a table or shelf
•
The following components are delivered with the 8265 switch and are used to connect
a console, locally or remotely, to the CPSW module serial port:
RS-232 DTE/DCE cable (Part Number 59G0278)
•
Null modem interposer (Part Number 58F2861)
•
Gender changer interposer (Part Number 58G4422).
•
Note:
The load sharing power supply with its power cord, the controller module, the
CPSW module, and media modules are ordered separately.
In addition to the base components supplied with the switch, the following
components are also required to operate the 8265:
8265 Controller Module (Feature Code 8000)
•
8265 Control Point and Switch Module (Feature Code 6501)
•
PCMCIA card for Control Point and Switch Module, either:
•
– Base microcode with UNI and IISP functions, or
– Enhanced microcode with UNI, IISP, and PNNI functions.
ATM media modules (8265 and/or 8260)
•
Power supplies: either
•
– 415 W AC (Feature Code 8027), or
– 295 W -48 Vdc (Feature Code 8026)
Power supply cables
•
Documentation (on CD-ROM).
•
For additional optional components, refer to page 14.
Part 1
9