Aastra 9000i Series Administrator's Manual page 493

Aastra Web UI
3 Click on Operation->Softkeys and XML.
4 Pick a softkey to configure for parking a call.
5 In the "Type" field, select Park.
6 In the "Label" field, enter a label for the park softkey.
Note: The" Value" and "Line" fields are already configured from the "Park Pickup Config" field.
7 The park softkey has a default state of "Connected".
Leave this state enabled or to disable, uncheck the check box.
8 Pick a softkey to configure for Picking up a call.
9 In the "Type" field, select Pickup.
10 In the "Label" field, enter a label for the Pickup softkey.
Note: The" Value" and "Line" fields are already configured from the "Park Pickup Config" field.
11 The pickup softkey has a default state of "Idle" and "Outgoing".
Leave these states enabled or to disable, uncheck the check boxes.
12 Click
13 Click on Reset, then click
For CT Handset:s
1 Click on Advanced Settings -> Line 1 (you can select any line)
2 Under Advanced SIP Settings in the "Park Pickup Config" field, enter the appropriate value based
on the server in your network.
Note: For values to enter in this field, see the table
on page 5-215.
Note: Leave the park/pickup configuration field blank to disable the park and pickup feature.
5-216
to save your changes.
to restart the IP phone and apply the changes.
"Park/Pickup Call Server Configuration Values"
41-001343-01 Rev 02, Release 3.2.2