Administrator Passwords - Aastra 9000i Series Administrator's Manual

Aastra Web UI
2 Press Password. A keyboard displays.
3 Press on the "Current Password" text box, and enter the current user password.
4 Press on the "New Password" text box, and enter the new user password.
5 Press on the "Re-enter Password" text box, and re-enter the user password.
6 Press Save. The Options screen displays indicating your changes were saved.

Administrator Passwords

An administrator can change the administrator passwords on the phone using the configuration
files only.
An administrator can also assign a password for using the Options key on the IP phone. You turn
this feature on and off by entering the "options password enabled" parameter followed by a
valid value in the configuration files. Valid values are 0 (false; Options key not password
protected), or 1 (true; Options key password protected). If this parameter is set to 1, a user has to
enter a password at the IP phone UI. If the password is entered correctly, the user is allowed to
gain access to the Options Menu and no more password prompts display for other password
protected screens. If the user fails to enter the correct password in three attempts, access to the
Options Menu is denied and the IP phone returns to the idle screen.
Procedure
Use the following procedure to change the administrator password.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Settings" on page A-15.
5-8
"Password
41-001343-01 Rev 02, Release 3.2.2