Aastra 9000i Series Administrator's Manual page 198

Configuring SIP and TLS Source Ports Using the Aastra Web UI
Use the following procedure to configure SIP and TLS source ports using the Aastra Web UI.
Aastra Web UI
1 Click on Advanced Settings->Global SIP->Advanced SIP Settings.
.
"Local SIP UDP/TCP Port" Parameter
2 The "Local SIP UDP/TCP Port" field has a default value of 5060. Change this value if required to a
value greater than 1024 and less than 65535.
Note: It is recommended that you avoid the conflict RTP port range in case of a UDP transport.
3 The "Local SIP TLS Port" field has a default value of 5061. Change this value if required to a value
greater than 1024 and less than 65535.
Note: It is recommended that you avoid the conflict with any TCP ports being used. For example:
WebUI HTTP server on 80/tcp and HTTPS on 443/tcp.
4 Click
41-001343-01 Rev 02, Release 3.2.2
to save your changes.
"Local SIP TLS Port" Parameter
4-35