Aastra 9000i Series Administrator's Manual page 736

Parameter –
ethernet port 0
LAN Port
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
ethernet port 1
PC Port
(in Web UI)
Description
Format
Default Value
Range
Example
41-001343-01 Rev 02, Release 3.2.2
IP phone UI Options->Administrator Menu->
Network Settings
Aastra Web UI Advanced Settings->Network->
Basic Network Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
The send (TX) and receive (RX) method to use on Ethernet port 0 to
transmit and receive data over the LAN.
Integer
0
0 - auto-negotiate
1 - full-duplex, 10Mbps
2 - full-duplex, 100Mbps
3 - half-duplex, 10Mbps
4 - half-duplex, 100Mbps
ethernet port 0: 3
IP phone UI Options->Administrator Menu->
Network Settings
Aastra Web UI Advanced Settings->Network->
Basic Network Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
The send (TX) and receive (RX) method to use on Ethernet port 1 to
transmit and receive data over the LAN.
Note: PC Port parameters are not applicable to the 6730i IP Phone.
Integer
0
0 - auto-negotiate
1 - full-duplex, 10Mbps
2 - full-duplex, 100Mbps
3 - half-duplex, 10Mbps
4 - half-duplex, 100Mbps
ethernet port 1: 2
A-11