Aastra 9000i Series Administrator's Manual page 997

#ip: # This value is unique to each phone on a server
# and should be set in the "<mac>.cfg" file if
# setting this manually.
#subnet mask:
#default gateway:
#dns1:
#dns2:
# Time Server Settings
# ====================
#time server disabled: 1 # Time server disabled.
#time server1:
#time server2:
#time server3:
# Time Server Disabled:
# 0 = false, means the time server is not disabled.
# 1 = true, means the time server is disabled.
# NAT Settings
#=============
# Option 1:
#
# If you are using a session border controller, you should set the
# outbound proxy to the session border controller address
#sip outbound proxy: sbc.aastra.com
#sip outbound proxy port: 0
C-12
# Enable time server and enter at
# least one time server IP address or
# qualified domain name
# a value of 0 enables SRV
# lookups for the address of
# the proxy.
41-001343-01 Rev 02, Release 3.2.2