Authentication Support For Http/Https Download Methods, Used With Broadsoft Client Management System (Cms) - Aastra 9000i Series Administrator's Manual

Ip sip phones
Hide thumbs Also See for 9000i Series:
Table of Contents

Advertisement

Authentication Support for HTTP/HTTPS Download Methods, used with Broadsoft
Client Management System (CMS)
The IP phones support HTTP/HTTPS digest authentication as defined in
RFC 2617. (The HTTP client supports digest authentication; the HTTP server does not; the HTTP
server supports basic authentication). This feature allows the phones to interoperate with
Broadsoft's CMS phone configuration tool.
Using the configuration files, you can enable/disable the following parameter to display a LOG IN
softkey which allows the HTTP/HTTPS server to perform digest authentication:
http digest force login - specifies whether or not to display the LOG IN softkey on the IP
Phone UI screen. Valid values are 0 (disabled) or 1 (enabled). Default is 0 (disabled).
If the "http digest force login" parameter is set to 1 (enabled), after the phone boots, the LOG IN
softkey displays on the phone's LCD. If the user presses this softkey, a username/password screen
displays, allowing the user to enter the configured username and password that is sent to the
HTTP/HTTPS server for digest authentication by the server. By default, username is "aastra" and
password is "aastra". You can enter the username and password in two ways:
Using the configuration files, you can change the default values for the following parameters:
— http digest username - specifies the username to use for HTTP/HTTPS digest
— http digest password - specifies the password to use for HTTP/HTTPS digest
By enabling the "http digest force login" parameter (setting to 1) - the phone displays the
LOG IN key so the user can enter the default username/password via the IP Phone UI.
Configuring Broadsoft CMS Support via the Configuration Files
Configure Broadsoft CMS support on the IP Phone using the following parameters in the
configuration files:
http digest force login
http digest username
http digest password
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Authentication Support for Broadsoft CMS"
41-001343-01 Rev 02, Release 3.2.2
authentication.
authentication.
on
page A-99.
"HTTP/HTTPS
5-339

Advertisement

Table of Contents
loading

This manual is also suitable for:

6700i series9000i6700i

Table of Contents