Stuttered Dial Tone Setting; Message Waiting Indicator Settings - Aastra 9000i Series Administrator's Manual

Stuttered Dial Tone Setting

Parameter –
stutter disabled
Stuttered Dial Tone
(in Web UI)
Description
Format
Default Value
Range
Example

Message Waiting Indicator Settings

Parameter –
mwi led line
Message Waiting Indicator
Line
(in Web UI)
Description
Format
Default Value
Range
Example
41-001343-01 Rev 02, Release 3.2.2
Aastra Web UI: Basic Settings->Preferences->General
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Enable or disables the playing of a stuttered dial tone when there is a
message waiting on the IP phone.
Boolean
0 (false)
0 (false)
1 (true)
stutter disabled: 1
Aastra Web UI
Configuration Files
Allows you to enable the Message Waiting Indicator (MWI) on a single
line or on all lines on the phone. For example, if you set this parameter to
3, the LED illuminates if a voice mail is pending on line 3. If you set this
parameter to 0, the LED illuminates if a voice mail is pending on any line
on the phone (lines 1 through 9).
Note: To enable MWI for all lines in the configuration files, set this
parameter to zero (0). The enable MWI for all lines in the Aastra Web UI,
select "All" in the "Message Waiting Indicator Line" field.
Integer
0 (all lines)
0 -9
mwi led line: 3
Basic Settings->Preferences->General
aastra.cfg, <model>.cfg, <mac>.cfg
A-159