Aastra 9000i Series Administrator's Manual page 627

These parameters are disabled by default. The parameters are configurable via the configuration
files or the Aastra Web UI.
Configuring the MAC address/Line Number in REGISTER Message
Configuration Files
For specific parameters you can set in the configuration files for enabling/disabling MAC address and line
number, see Appendix A, the section,
Aastra Web UI
Step Action
1 Click on Advanced Settings->Global SIP->Advanced SIP Setting.
2 Enable the "Send MAC Address in REGISTER Message" field by checking the check box.
(Disable this field by unchecking the box).
3 Enable the "Send Line Number in REGISTER Message" field by checking the check box.
(Disable this field by unchecking the box).
4 Click
Note: The session prompts you to restart the IP phone to apply the configuration settings.
5 Select Operation->Reset and click
6-6
"Advanced Operational Parameters"
to save your settings.
.
on page A-236.
41-001343-01 Rev 02, Release 3.2.2