Group Paging Rtp Settings; Key Mapping - Aastra 9000i Series Administrator's Manual

Group Paging RTP Settings

Parameter in
Aastra Web UI
Paging listen addresses
Note: This option can
be set by both Users
and Administrators.

Key Mapping

Parameter in
Aastra Web UI
Map Redial Key To
Map Conf Key To
3-26
Parameter in
Configuration Files
paging group listening
Parameter in
Configuration Files
map redial key to
map conf key to
Allows you to specify up to 5 listening multicast addresses to send/
receive a Real Time Transport Protocol (RTP) stream to/from these
pre-configured multicast address(es) without involving SIP signaling.
For more information on this feature, see
Settings" on page 5-110.
Sets the Redial key as a speeddial key if a value is entered for this
parameter. If you leave this parameter blank, the Redial key returns
to its original functionality.
Note: If you configure the Redial key for speeddialing on the 9480i
CT or 6757i CT Base Stations, the Redial key on the 9480i CT and
6757i CT handsets retain their original functionality. The Redial key
on the handset is not configured for speeddial.
For more information on this feature, see
page 5-114.
Sets the Conf key as a speeddial key if a value is entered for this
parameter. If you leave this parameter blank, the Conf key returns to
its original functionality.
Note: If you configure the Conf key for speeddialing on the 9480i CT
or 6757i CT Base Stations, the Conf key on the 9480i CT and 6757i
CT handsets retain their original functionality. The Conf key on the
handset is not configured for speeddial.
For more information on this feature, see
page 5-114.
Description
"Group Paging RTP
Description
"speeddialKey Mapping"
"speeddialKey Mapping"
41-001343-01 Rev 02, Release 3.2.2
on
on