Aastra 9000i Series Administrator's Manual page 696

Enabling Auto-Resync Using the Aastra Web UI
Use the following procedure to enable auto-resync for the phones in your network.
Aastra Web UI
Step Action
1 Click on Advanced Settings->Configuration Server->Auto-Resync.
Auto-Sync
Parameters
2 In the "Mode" field, select the auto-resync mode you want to use to automatically update the phone.
Valid values are:
None
Configuration Files Updates the configuration files on the IP phone automatically at the specified
Firmware
Both
Notes:
1. If a user is accessing the Aastra Web UI, they are not informed of an auto-reboot.
2. Any changes made using the Aastra Web UI or the IP phone UI are not overwritten by an
auto-resync update. Auto-resync affects the configuration files only. However, the settings in the
Aastra Web UI take precedence over the IP phone UI and the configuration files.
3. The resync time is based on the local time of the IP phone.
4. If the IP phone is in use (not idle) at the time of the resync check, the reboot occurs when the
phone becomes idle.
41-001343-01 Rev 02, Release 3.2.2
Disable auto-resync
time if the files on the server have changed.
Updates the firmware on the IP phone automatically at the specified time if the
files on the server have changed.
Updates the configuration files and firmware automatically at the specified time
if the files on the server have changed.
8-9