Configuration Files (Administrator Only); Using The Configuration Files - Aastra 9000i Series Administrator's Manual

Configuration Files (
A system administrator can enter specific parameters in the configuration files to configure the
IP phones. All parameters in configuration files can only be set by an administrator.
You can enter specific configuration parameters in either of the following configuration files:
• aastra.cfg
• <model>.cfg
• <mac>.cfg
References
For information about configuration file precedence, see
For a description of each configuration file parameter, see
Parameters."

Using the Configuration Files

When you use the configuration files to configure the IP phones, you must use a text-based
editing application to open the configuration file (aastra.cfg, <model>.cfg, or <mac>.cfg).
Use the following procedure to add, delete, or change parameters and their settings in the
configuration files.
Configuration files
Step Action
1 Using a text-based editing application, open the configuration file for the phone, for which you want to
configure the directory list (either aastra.cfg, <model>.cfg, <mac>.cfg or all three).
2 Enter the required configuration parameters followed by the applicable value. For example,
directory 1: company_directory
directory 2: my_personal_directory
3 Save the changes and close the configuration file.
4 If the parameter requires the phone to be restarted in order for it to take affect, use the
IP Phone UI or the Aastra Web UI to restart the phone.
2-16
Administrator Only
Note: Apply this procedure wherever this Administrator Guide refers to
configuring parameters using the configuration files.
)
Chapter 1, "Overview."
Appendix A, "Configuration
41-001343-01 Rev 02, Release 3.2.2