Aastra 9000i Series Administrator's Manual page 936

Parameter –
prgkeyN value
Value
(in Web UI)
Description
Format
Default Value
Range
Example
41-001343-01 Rev 02, Release 3.2.2
Aastra Web UI
Configuration Files
This is the value you assign to the programmable key.
The "prgkeyN value" parameter can be set for the following softkey types
only:
• speeddial (you can enter a speeddial number for this field;
optionally, you can also enter a prefix for the
speeddial value to allow the phone to dial the prefix
after you press the speeddial programmable key;
you then enter the rest of the number from the
keypad on the phone.)
• line
• blf
• sprecode
• dcp
• xml
• park
• pickup
• blfxfer
• speeddialxfer
• speeddialconf
• paging
Notes:
1. For speeddial - Value is the phone number, extension, or prefix
number to enter for the programmable key.
2. For line - Value is optional; for example L4.
3. For blf - Value is the extension you want to monitor.
4. For sprecode - Value is dependent on services offered by server.
5. For xml - You can specify a URI to use for this XML softkey. The
variables you can use with the XML softkey URI are:
• $$SIPUSERNAME$$
• $$SIPAUTHNAME$$
• $$PROXYURL$$
• $$LINESTATE$$
• $$LOCALIP$$
• $$REMOTENUMBER$$
• $$DISPLAYNAME$$
• $$SIPUSERNAME$$
• $$INCOMINGNAME$$
• $$CALLDURATION$$
• $$CALLDIRECTION$
6. For Park, Pickup - For valid values, see Chapter 5, the section,
"Park/Pickup Call Server Configuration Values"
Park/Pickup examples, see Chapter 5, the section
Models with 3-Line LCDs"
String
Not Applicable
Not Applicable
prgkey3 value: 411
prgkey4 value: 123456+ (example of a speeddial prefix)
Operation->Programmable Keys
aastra.cfg, <model>.cfg, <mac>.cfg
on page -214.
on page -215. For
"Examples for
A-211