Aastra 9000i Series Administrator's Manual page 84

Locking Parameters in the Configuration File
The IP Phones allow you to lock individual configuration parameters to prevent an end user from
changing the configuration on the phone. This feature allows service providers to prevent the
end-user from changing the values of specific parameters that would affect the service they
provide.
An Administrator can lock parameters on the phone by placing an exclamation mark (
the parameter in the configuration file. For example,
!
admin password: 22222
!
emergency dial plan: 911|999
You can lock parameters on the phone using the configuration files only. Once the parameters are
locked, they cannot be changed at all during the phones run-time. The parameters appear as
read-only when accessing the Aastra Web UI and the IP Phone UI. In the Aastra Web UI, they
appear grayed out. In the IP Phone UI the ability to change the parameters is removed. In addition,
when parameters are locked, they cannot be changed via XML.
Limitations
• A User possessing the Administrator password can bypass the locking of configuration server
details by defaulting the phone.
• Parameters cannot be locked using XML.
• Configuration files that include locked parameters are not backwards compatible
41-001343-01 Rev 02, Release 3.2.2
Notes:
1.
The "parameter locking" feature applies to Release 2.4 and up. Any
phones that have a previous release loaded on the phone will not be able
to use the locking functionality in the configuration file.
2.
Any parameter duplicated in the <model>.cfg from the aastra.cfg
is overwritten by the locking status and the value of the parameter found
in the <model>.cfg file. Parameters in the <mac>.cfg file overwrite
parameters in the <model>.cfg and aastra.cfg files.
!
) before
2-17