Aastra 9000i Series Administrator's Manual page 947
Ip sip phones
Hide thumbs
Also See for 9000i Series:
- Administrator's manual (876 pages) ,
- Configuration manual (27 pages) ,
- Instruction manual (29 pages)
Table of Contents
Advertisement
Format
Default Value
A-222
•
sprecode - Indicates the softkey is configured to automatically
activate specific services offered by the server. For example, if the
sprecode value of *82 is configured, then by pressing the softkey, *82
automatically activates a service provided by the server.
•
park - Indicates the softkey is configured to park incoming calls when
pressed.
•
pickup - Indicates the softkey is configured to pick up parked calls
when pressed.
•
lcr - Indicates the softkey is configured for "last call return" when
pressed.
•
callforward - Indicates the softkey is configured for accessing the
Call Forward features on the phone. A Call Forwarding Mode must be
enabled to use this softkey. "Account" mode is the default.
•
blfxfer - Indicates the softkey is configured to transfer calls AND
configured for BLF on a single key.
•
speeddialxfer - Indicates the softkey is configured to transfer calls
AND configured for speeddialing to a specific number.
•
speeddialconf - Indicates the softkey is configured to be used as a
speeddial key AND as a conference key.
•
callers - Indicates the softkey is set for accessing the Callers List.
•
directory - Indicates the softkey is set for accessing the Directory
List.
•
icom - Indicates the softkey is set to be used as the Intercom key.
•
services - (not available on the 6753i) Indicates the softkey is set to
be used as the Services key.
•
phonelock - Indicates the softkey is set to be used to lock/unlock the
phone.
•
paging - Indicates the softkey is set for Group Paging on the phone.
Pressing this key automatically sends a Real Time Transport Protocol
(RTP) stream to pre-configured multicast address(es) without
involving SIP signaling.
•
empty - Indicates the softkey is configured to force a blank entry on
the IP phone display for a specific softkey. The soft keys are added in
order (from softkey1 to softkey20) after any hard-coded keys have
been added. If a particular soft key is not defined, it is ignored.
none
41-001343-01 Rev 02, Release 3.2.2
Advertisement
Table of Contents
Troubleshooting
