Aastra 9000i Series Administrator's Manual page 293

Emergency Dial Plan and Pattern Matching
The IP Phones support emergency dialing using pattern matching and prepend dial plan
functionality.
There are two ways to dial a number on the phone:
• dialing digit-by-digit (i.e., select line and dial)
• dialing by string (i.e., pre-dial then go off-hook)
When a user dials digit-by-digit, the phone adds every digit to a dialed string and checks against
the dial plan. If the phone is not locked, it checks against the regular dial plan. If the phone is
locked, it checks against the emergency dial plan.
When a user dials by string, (pre-dial, speed-dial, etc., and then goes off-hook), and the phone is
not locked, it checks to see if the number matches the emergency dial plan. If it doesn't match, it
blocks the call from going through. If the phone is locked, and the number matches the
emergency dial plan it allows the call to go through.
Adding a pre-pend to a dial plan also works with both dialing digit-by-digit and dialing by
string.
Limitation
The following is a limitation for emergency dial plans with pattern matching:
• Secondary dial tone is not supported.
You can set the emergency dial plan via the configuration files or the Aastra Web UI.
Configuring an Emergency Dial Plan
Use the following procedures to specify the numbers to use on your phone for dialing emergency
services in your area.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Plan Settings" on page A-16.
5-16
"Emergency Dial
41-001343-01 Rev 02, Release 3.2.2