Configuration Server Settings - Aastra 9000i Series Administrator's Manual

Configuration Server Settings

The configuration server stores the firmware images, configuration files, and software when
performing software upgrades to the IP phone. An administrator can configure the following
parameters for the configuration server:
Parameter In
IP Phone UI Aastra Web UI
Download Protocol Settings
Download Protocol Download Protocol
Primary TFTP TFTP Server
Primary TFTP Path TFTP Path
3-64
Parameter in Parameters in
Configuration Files
download protocol
tftp server
tftp path
Description
Protocol to use for downloading new versions of
software to the IP phone. Valid values are:
TFTP
FTP
HTTP
HTTPS
Note: For DHCP to automatically populate the
IP address or domain name for the download
servers, your DHCP server must support Option
66. The IP phones also support Option 60 and
43.
For more information, see Chapter 4, the
section, "DHCP" on page 4-3.
For more information about download protocols
on the IP Phone, see Chapter 4,
Server Protocol" on page
The TFTP server's IP address or qualified
domain name. If DHCP is enabled and the
DHCP server provides the information, this field
is automatically populated. Use this parameter
to change the IP address or domain name of the
TFTP server. This will become effective after
this configuration file has been downloaded into
the phone.
For more information, see Chapter 4,
"Configuration Server Protocol"
Specifies the path name for which the
configuration files reside on the TFTP server for
downloading to the IP Phone.
If the IP phone's configuration and firmware files
are located in a sub-directory beneath the
server's root directory, the relative path to that
sub-directory should be entered in this field.
Note: Enter the path name in the form
folderX\folderX\folderX. For example,
ipphone\6757i\configfiles.
For more information, see Chapter 4,
"Configuration Server Protocol"
41-001343-01 Rev 02, Release 3.2.2
"Configuration
4-104.
on page 4-104.
on page 4-104.