Configurable Indication of Terminated Calls
An Administrator can configure a parameter called, "far-end disconnect timer" which allows
you to enable or disable whether or not the near-end phone displays a disconnected screen ("Call
Terminated") when the far-end hangs up. An audible busy signal is also heard on the phone. If
enabled with a maximum time interval value, this parameter also specifies the interval of time
that the busy signal is audible.
You can enable/disable this new parameter using the configuration files only.
The following are call terminated screens that display for each type of Aastra phone.
5-330
Call Terminated Screens
1
6753i
Call Terminated
3-Line Display Screens
345
Call Terminated
6739i Display Screens
6757i
L1
Call Transferred
5-Line Display Screens
12 : 23pm
Goodbye
41-001343-01 Rev 02, Release 3.2.2