Aastra 9000i Series Administrator's Manual page 108

Parameter in
Aastra Web UI
Display DTMF Digits
Note: This option can
be set by both Users
and Administrators.
Call Waiting
Note: This option can
be set by both Users
and Administrators.
Play Call Waiting Tone
Note: This option can
be set by both Users
and Administrators.
Call Waiting Tone Period
Note: This option can
be set by an
Administrator only.
Stuttered Dial Tone
Note: This option can
be set by both Users
and Administrators.
XML Beep Support
Note: This option can
be set by both Users
and Administrators.
Status Scroll Delay
(seconds)
Note: This option can
be set by both Users
and Administrators.
Incoming Call Interrupts
Dialing
Note: This option can
be set by both Users
and Administrators.
41-001343-01 Rev 02, Release 3.2.2
Parameter in
Configuration Files
display dtmf digits
call waiting
call waiting tone
call waiting tone period
stutter disabled
xml beep notification
xml status scroll delay
incoming call interrupts
dialing
Enables and disables the display of DTMF digits on the IP phone
display during a connected state.
For more information on this feature, see.
page 5-68.
Enable or disables Call Waiting on the IP Phone.
For more information on this feature, see.
page 5-71.
Enable or disables the playing of a call waiting tone when a caller is
on an active call and a new call comes into the phone.
For more information on this feature, see.
page 5-73.
Specifies the time period, in seconds, that the call waiting tone is
audible on an active call when another call comes in. When enabled,
the call waiting tone plays at regular intervals for the amount of time
set for this parameter. For example, if set to "30" the call waiting tone
plays every 30 seconds. When set to "0", the call waiting tone is
audible only once on the active call.
For more information on this feature, see
on page 5-75.
Enable or disables the playing of a stuttered dial tone when there is
a message waiting on the IP phone.
For more information on this feature, see.
page 5-76.
Enables or disables the playing of a beep to indicate a status on the
phone. When the phone receives a status message, the BEEP
notifies the user that the message is displaying.
For more information on this feature, see
page 5-77.
Allows you to set the time delay, in seconds, between the scrolling of
each status message on the phone.
For more information on this feature, see
page 5-78.
Enable or disables how the phone handles incoming calls while the
phone is dialing out. For more information on this feature, see
"Incoming Call Interrupts Dialing"
Description
"Display DTMF Digits"
"Call Waiting"
"Call Waiting Tone"
"Call Waiting Tone Period"
"Stuttered Dial Tone"
"XML Beep Support"
"Status Scroll Delay"
on page 5-79.
on
on
on
on
on
on
3-21