Aastra 9000i Series Administrator's Manual page 111

Incoming/Outgoing Intercom Calls
The Incoming/Outgoing Intercom Call settings on the IP Phone
phone or the server is responsible for notifying the recipient that an Intercom call is being
placed. These settings also specify the prefix code for server-side Intercom calls, and specifies
the configuration to use when making the Intercom call
Parameter in
Aastra Web UI
Incoming Intercom Settings (all models)
Auto-Answer
Note: This option can
be set by both Users
and Administrators.
Microphone Mute
Note: This option can
be set by both Users
and Administrators.
Play Warning Tone
Note: This option can
be set by both Users
and Administrators.
Allow Barge In
Note: This option can
be set by both Users
and Administrators.
Outgoing Intercom Settings (8 and 11-Line LCD phones)
Type
3-24
Parameter in
Configuration Files
sip allow auto answer
sip intercom mute mic
sip intercom warning
tone
sip intercom allow barge
in
sip intercom type
Enables or disables the IP phone to allow automatic answering for an
Intercom call. If auto-answer is enabled on the IP phone, the phone
plays a tone to alert the user before answering the intercom call. If
auto-answer is disabled, the phone rejects the incoming intercom call
and sends a busy signal to the caller.
For more information on this feature, see
Intercom with Auto-Answer and Barge In"
Enables or disables the microphone on the IP phone for Intercom
calls made by the originating caller.
For more information on this feature, see
Intercom with Auto-Answer and Barge In"
Enables or disables a warning tone to play when the phone receives
an incoming intercom call on an active line.
For more information on this feature, see
Intercom with Auto-Answer and Barge In"
Enable or disables how the phone handles incoming intercom calls
while the phone is on an active call.
For more information on this feature, see
Intercom with Auto-Answer and Barge In"
Determines whether the IP phone or the server is responsible for
notifying the recipient that an Intercom call is being placed.
Applicable settings are Phone-Side, Server-Side, OFF.
For more information on this feature, see
Intercom with Auto-Answer and Barge In"
specify whether the IP
.
Description
"Incoming/Outgoing
on page 5-106.
"Incoming/Outgoing
on page 5-106.
"Incoming/Outgoing
on page 5-106.
"Incoming/Outgoing
on page 5-106.
"Incoming/Outgoing
on page 5-106.
41-001343-01 Rev 02, Release 3.2.2