Aastra 9000i Series Administrator's Manual page 140

Ip sip phones
Hide thumbs Also See for 9000i Series:
Table of Contents

Advertisement

Parameter in
Aastra Web UI
AS-Feature-Event
Subscription Period
Send MAC Address in
REGISTER Message
Send Line Number in
REGISTER Message
Session Timer
Timer 1 and Timer 2
Transaction Timer
41-001343-01 Rev 02, Release 3.2.2
Parameters in
Configuration Files
sip as-feature-event
subscription period
sip send mac
sip send line
sip session timer
sip T1 timer
sip T2 timer
sip transaction timer
Description
Specifies the amount of time, in seconds, between
resubscribing. If the phone does not resubscribe in the time
specified for this parameter, it loses subscription.
For more information about this parameter, see Chapter 6,
the section,
"As-Feature-Event Subscription"
Adds an "Aastra-Mac:" header to the SIP REGISTER
messages sent from the phone to the call server, where the
value is the MAC address of the phone.
For more information about this parameter, see Chapter 6,
the section,
"TR-069 Support"
Adds an "Aastra-Line:" header to the SIP REGISTER
messages sent from the phone to the call server, where the
value is the line number that is being registered.
For more information about this parameter, see Chapter 6,
the section,
"TR-069 Support"
The time, in seconds, that the IP phone uses to send
periodic re-INVITE requests to keep a session alive. The
proxy uses these re-INVITE requests to maintain the status'
of the connected sessions. See RFC4028 for details.
Default is 0.
For more information, see Chapter 4,
Settings (optional)"
on
page
These timers are SIP transaction layer timers defined in
RFC 3261. Timer 1 is an estimate, in milliseconds, of the
round-trip time (RTT). Timer 2 represents the amount of
time, in milliseconds, a non-INVITE server transaction takes
to respond to a request.
For more information, see Chapter 4,
Settings (optional)"
on
page
The amount of time, in milliseconds that the phone allows
the callserver (registrar/proxy) to respond to SIP messages
that it sends. If the phone does not receive a response in
the amount of time designated for this parameter, the phone
assumes the message has timed out.
For more information, see Chapter 4,
Settings (optional)"
on
page
on
page
on
page
6-5.
on
page
6-5.
"Advanced SIP
4-83.
"Advanced SIP
4-83.
"Advanced SIP
4-83.
6-16.
3-53

Advertisement

Table of Contents
loading

This manual is also suitable for:

6700i series9000i6700i

Table of Contents