Aastra 9000i Series Administrator's Manual page 133

Parameter In
IP Phone UI Aastra Web UI
PC Port Settings (Port 1)
PC Port VLAN ID VLAN ID
PC Port Priority Priority
3-46
Parameter in Parameters in
Configuration Files
VLAN id port 1
QoS eth port 1 priority
Description
Specifies the VLAN ID used to pass packets
through to a PC via Port 1.
Note: If you set the PC Port VLAN ID (Port 1) to
4095, all untagged packets are sent to this port.
The following is an example of configuring the
phone on a VLAN where all untagged packets are
sent to the passthrough port.
Example
You enable tagging on the LAN Port (VLAN id) as
normal but set the PC Port (VLAN id port 1) to
4095. The following example sets the phone to be
on VLAN 3 on the LAN Port but the PC Port is
configured as untagged.
tagging enabled: 1
VLAN id: 3
VLAN id port 1: 4095
For more information, see Chapter 4,
(optional)" on page 4-51.
Note: The PC Port parameters are not applicable
to the 6730i IP Phone.
Specifies the priority value used for passing VLAN
packets through to a PC via Port 1.
For more information, see Chapter 4,
(optional)" on page 4-51.
41-001343-01 Rev 02, Release 3.2.2
"Virtual LAN
"Virtual LAN