Aastra 9000i Series Administrator's Manual page 330

Configuring Language Input Using the Configuration Files
An Administrator can specify the input language to use by entering a specific parameter in the
configuration files. An Administrator must enter the following parameter to enable this feature:
• input language
Use the following procedures to specify the input language to use on the IP phone.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Settings" on page A-171.
Configuring Language Input Using the IP Phone UI
Once "Language Input" is enabled, an Administrator or User can change the input language on the
phone using the IP Phone UI. The "Input Language" option appears under the Language option
in the IP Phone UI.
Example
Use the following procedure to change the input language using the IP Phone UI.
Aastra IP Phone UI
Step Action
1 Press the Options key.
2 Select Language from the Options List.
3 Select Input Language from the Language List.
41-001343-01 Rev 02, Release 3.2.2
Preferences
1. Tones
2. Contrast Level
3. Speed Dial Edit
4. Live Dialpad
5. Set Audio
6. Time and Date
7. Language
- Select
Done -
Language Option Input Language Option
Language
1. Screen Language
2. Input Language
- Select
Done -
"Language
Input Language
1. English
2. Français
3. Español
4. Deutsch
5. Italiano
6. Русский
Cancel -
Done -
Languages Available
5-53