Aastra 9000i Series Administrator's Manual page 168

Enabling/Disabling DHCP Using the IP Phone UI
Use the following procedure to enable/disable DHCP on the phone using the IP Phone UI.
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2 Select Administrator Menu.
3 Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4 Select Network Settings.
5 Select option DHCP.
6 Press Change to set "Use DHCP?" to "Yes" (enable) or "No" (disable).
7 Press Done to save the changes.
For the 6739i:
1 Press the Options key on the phone to enter the Options List.
2 Press Advanced. A keyboard displays.
3 Enter the Administrator password using the keyboard. Default is "22222".
4 Press Network.
5 Press DHCP Settings.
6 In the "Use DHCP?" field, select "Enabled" to enable DHCP.
or
Press "Disabled" to disable DHCP.
7 Press the
8 Press the
41-001343-01 Rev 02, Release 3.2.2
to return to the previous screen.
button or the button at any time to return to the idle screen.
4-5