Aastra 9000i Series Administrator's Manual page 839

Ip sip phones
Hide thumbs Also See for 9000i Series:
Table of Contents

Advertisement

Parameter –
sips private key
Private Key Filename
(in Web UI)
Description
Format
Default Value
Range
Example
A-114
Aastra Web UI
Configuration Files
Allows you to specify a Private Key file to use when the phone uses the
TLS transport protocol to setup a call.
This parameter is required when configuring TLS (optional for Persistent
TLS.)
You can use this parameter in three ways:
To download no private key
To download a private key from the original configuration server
To download a private key from another specified server
To download a specific file, the string value MUST HAVE A FILENAME at
the end of the string. For example:
sips trusted certificates:ftp://admin:admin!@1.2.3.4:50/path/
phonesPrivatekey.pem
where "path" is the directory and "phonesPrivateKey.pem" is the filename.
If you do not specify a filename, the download fails.
See examples for each below.
Note: The key file must use the format ".pem". To create specific private
key files to use on your IP phone, contact Aastra Technical Support.
<file name>.pem
Not Applicable
Not Applicable
The following example downloads no private key file:
sips private key:
The following example downloads the private key file from the original
configuration server.
sips private key: phonesPrivateKey.pem
The following example uses FTP to download the firmware file
"phonesPrivateKey.pem" (private key file) from the "path" directory on
server 1.2.3.4 using port 50:
sips private key: ftp://admin:admin!@1.2.3.4:50/path/
phonesPrivateKey.pem
Advanced Settings->TLS Support
aastra.cfg, <model>.cfg, <mac>.cfg
41-001343-01 Rev 02, Release 3.2.2

Advertisement

Table of Contents
loading

This manual is also suitable for:

6700i series9000i6700i

Table of Contents