Call Hold Reminder Frequency - Aastra 9000i Series Administrator's Manual

Call Hold Reminder Frequency

Parameter –
call hold reminder frequency
Description
Format
Default Value
Range
Example
A-156
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Specifies the time interval, in seconds, between each ring splash sound
on the active line. For example, if a call comes into Line 1, and then a call
comes into Line 2 and you answer Line 2, Line 1 is automatically placed
on hold. While on the active Line 2, after 7 seconds, a ring splash audio
sounds on the line reminding you that the call on Line 1 is still on hold
(determined by the "call hold reminder timer" parameter), and then the
ring splash is heard again after 60 seconds (determined by this
parameter).
Notes:
1. You must enable the "call hold reminder" and/or "call hold reminder
during active calls" parameter(s), and the "call hold reminder timer"
parameter, for this parameter to work.
2. A value of "0" prevents additional rings.
Integer
60
0-4294967295
call hold reminder frequency: 50
41-001343-01 Rev 02, Release 3.2.2