Aastra 9000i Series Administrator's Manual page 996

#
# The "aastra.cfg" file configures the settings server wide, the "<model>.cfg" file contains model specific
# information (for example, "6757i.cfg"), while the "<mac>.cfg" file configures only the phone with the MAC
# address for which the file is named (for example, "00085d0304f4.cfg"). The
# settings in the "aastra.cfg" file will be overridden by settings in the <model>.cfg file, and settings in the
# "<mac>.cfg" file override both settings in the "<model>.cfg" and the "aastra.cfg" files.
#-------------------------------------------------------------------
# DHCP Setting
# ============
#dhcp: 1 # DHCP enabled.
# DHCP:
# 0 = false, means DHCP is disabled.
# 1 = true, means DHCP is enabled.
#
# Notes:
#
# DHCP is normally set from the Options list on the phone or
# the web interface
#
# If DHCP is disabled, the following network settings will
# have to be configured manually either through the configuration
# files, the Options List in the phone, or the Web Client: IP
# Address (of the phone), Subnet Mask, Gateway, DNS, and TFTP
# Server.
#-------------------------------------------------------------------
# Network Settings
# ================
# Notes: If DHCP is enabled, you do not need to set these network
# settings. Although depending on you DHCP server configuration you
# may still have to set the dns address.
41-001343-01 Rev 02, Release 3.2.2 C-11