Aastra 9000i Series Administrator's Manual page 656

Aastra IP Phone UI
Step Action
13 Use the keys as applicable while entering the password; then press Done (8 and 11-Line LCD
phones).
or
Press Set (3-Line LCD phones.
14 Press the
For the 6739i
Aastra IP Phone UI
Step Action
1 Press to enter the Options List.
2 Press Advanced and enter your Administrator password using the pop-up keyboard.
3 Press Network.
4 Press the
5 Press Ethernet & VLAN.
6 Press 802.1x Support.
7 Press EAP Type and select a value to set. Valid values are:
• Disable (Default)
• EAP-MD5 (phone uses MD5 authentication)
• EAP-TLS (phone uses TLS authentication)
•
Note: The 802.1x Protocol is disabled by default. If you select EAP-TLS authentication, you must use
the configuration files or the Aastra Web UI to configure the certificates and private key for the phone.
8 Press EAP-TLS Settings.
9 Press Identity, and then press the text box. A pop-up keyboard displays allowing you to enter a
username used for authenticating the phone.
10 Press MD5 Password, and then press the text box to enter the password used for authenticating the
phone.
Note: You must restart the phone for the 802.1x authentication parameters to take affect.
11 Navigate to the Options screen and press Restart to restart the phone.
41-001343-01 Rev 02, Release 3.2.2
key to save your settings and exit from the IP Phone UI.
button to scroll to the next page.
6-35