Aastra 9000i Series Administrator's Manual page 568

Attribute/Option
XML Scroll Up and Scroll Down Tags
Timeout
XML Get Timeout
LockIn
CancelAction
Enabling/Disabling a Beep for Status Message Displays
You can enable or disable a BEEP option using the Status Message object (AastraIPPhoneStatus),
the configuration files, or the Aastra Web UI.
When the phone receives a status message, the BEEP notifies the user that the message is
displaying.
You can use the following to enable/disable a status message beep:
41-001343-01 Rev 02, Release 3.2.2
Description/Usage
Supports the new tags "scrollUp" and
"scrollDown" that are triggered when the
scrolling reaches the top or the bottom of the
menu items.
Use with:
XML object (See the Aastra XML
Developer's Guide)
Specifies a timeout value for the LCD screen
display.
Use with:
XML object (See the Aastra XML
Developer's Guide)
Specifies a timeout value, in seconds, that
the phone waits for the far side to return a
response after accepting the HTTP GET
connection.
Use with:
Configuration Files (See
Specifies whether or not the information on
the LCD screen stays displayed when other
events occur (such as pressing buttons on
the keypad).
Use with:
XML object (See the Aastra XML
Developer's Guide)
Specifies a URI that the phone executes a
GET on when the user presses the default
CANCEL key.
Use with:
XML object (See the Aastra XML
Developer's Guide)
Note: For enabling/disabling a status message beep using the Status
Message object, see the Aastra XML Developer's Guide.
Valid Values
some URI
0, 30, 45, 60
Default =45
0 to 214748364 seconds
Default =0 (never timeout)
page 5-294)
yes | no
Default = no
Fully qualified URI
For example:
cancelAction=
http://10.50.10.117/
ft.xml
5-291